MAX16838AUP/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.051W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 200kHz~2MHz |
| Base Part Number | MAX16838 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 40V |
| Power Dissipation | 2.122W |
| Output Current | 150mA |
| Max Supply Current | 5mA |
| Voltage - Output | 4.75V~5.25V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Current - Output / Channel | 150mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Voltage - Supply (Min) | 4.55V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16838AUP/V+ Overview
In order to save board space, the led driver uses the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package. The LED driver's design uses 2 outputs.Surface Mount represents this mounting method.With high efficiency, it emerges as a DC DC Regulator.It is capable of working normally at -40°C~125°C TJ.The benefits it provides to Automotive, Backlight are considerable.As a result, it operates in accordance with the frequency of 200kHz~2MHz.For its operation, terminations with a value of 0 are used.It has a base configuration of 20 pins.Undetermined failures will occur if the voltage supply is less than 4.55V.In total, it includes 2 segments.The LED driver is available under the part number MAX16838.There is 4.75V~5.25V voltage output from this device.In this device, there are 20 pins.Additionally, it is categorized into Display Drivers according to its characteristics.When the supply current should be less than 5mA, the device will provide high efficiency.The load is capable of receiving 150mA current.Powering systems requires an internal voltage of 40V.This LED driver belonging to the Automotive, AEC-Q100 series is a key component for a broad range of applications.
MAX16838AUP/V+ Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 200kHz~2MHz
Supply voltage of 12V
Operating with the supply voltage of 40V
MAX16838AUP/V+ Applications
There are a lot of Maxim Integrated MAX16838AUP/V+ LED Driver ICs applications.
- Refrigeration lighting
- Panel lighting
- Replacement lamps
- Medical surgery lighting
- General lighting
- Gallery lighting
- Stage and Studio lighting
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
