MAX16932BATIU/V+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 10V, ALSO AVAILABLE VOUT=3.3V |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~42V |
| Control Features | Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz~2.2MHz 500kHz~1.1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 98.5 % |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX16932BATIU/V+ Overview
It comes in the 28-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 2 outputs. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 3.5V~42V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. A switching controller such as this can switch at a value of 1MHz~2.2MHz 500kHz~1.1MHz . The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Frequency Control, Power Good. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at QUAD. Different dc switching's functions can be applied to 28 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 14V nominal DC switcher's voltage input. It is recommended that the dc dc voltage regulator's minimum input voltage be 3.5V. Statistically, DC regulator outputs 5V volts. Voltages 36V are the maximum that the dc to dc regulator will accept. A duty cycle set at 98.5 % ensures voltage regulator dc to dc reliability during power-on and power-off. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 10V, ALSO AVAILABLE VOUT=3.3V. A dc to dc voltage regulator in the Automotive, AEC-Q100 series, it belongs to this family.
MAX16932BATIU/V+ Features
Transistor Driver Outputs
Switching Frequency: 1MHz~2.2MHz 500kHz~1.1MHz
Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 98.5 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 10V, ALSO AVAILABLE VOUT=3.3V
MAX16932BATIU/V+ Applications
There are a lot of Maxim Integrated MAX16932BATIU/V+ DC to DC converter applications.
- Terrestrial set-top boxes
- Analog precision reference circuits
- Combined machine tools
- Boring machines
- ATMs
- Industrial robots
- Balance equipment
- Ball screw pair
- Overvoltage protection circuits in TV sets
- Gear/thread machining machines
