MAX1693EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1693 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 700mA |
| Output Configuration | High Side |
| Power Dissipation | 444mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 60m Ω |
| Drain to Source Resistance | 60mOhm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1693EUB+ Overview
It is package in Tube case.This package is included in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is USB Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Status Flag.It comes under the family of MAX1693.It contains 10 terminations.The 10 pins are used to operate the LED driver.The LED driver has 1 functions.700mAV is the maximum output of the LED driver.High efficiency is possible when the supply voltage is set to 5V.This LED driver is equipped with a total of 10 pins.There is a Power Management Circuits capacity container for this LED driver that is self-contained.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.This part has a power supply of 5V volts.
MAX1693EUB+ Features
Supplied from 5V
1 channels
MAX1693EUB+ Applications
There are a lot of Maxim Integrated MAX1693EUB+ Power Switches ICs applications.
- Notebook PC
- USB Protection
- Wireless Modem Data Cards
- Hot Swap
- HDD and SSD
- PDAs
- Low Voltage I/O System Power
- Portable GPS
- Set-Top Boxes
- USB Power Distribution
