MAX1693EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1693 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 25μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | USB Switch |
| Supply Type | Single |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 60m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1693EUB+T Overview
Tape & Reel (TR) is how it's packaged.The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains it.It has been mounted as Surface Mount on the LED driver.There is a switch type of USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.A lighting driver with Status Flag features is available.There is a MAX1693 family of things that it belongs to.A total of 10 terminations can be found in it.In order to operate, 10 pins are used.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.Using a voltage of 5V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.In total, it has 10 pins.Currently, the LED driving board has a resistance of 90mOhm ohms.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The maximum supply voltage for this LED driver is 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.7V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.This part has a power supply of 5V.
MAX1693EUB+T Features
Supplied from 5V
Resistance of 90mOhm
1 channels
MAX1693EUB+T Applications
There are a lot of Maxim Integrated MAX1693EUB+T Power Switches ICs applications.
- Portable Music Players
- Set-Top Boxes
- Hard Disk Drives
- Notebook and Tablet Computers
- Storage Drives
- USB Protection
- USB Ports/Hubs
- Wearable Devices
- Mobile Communication Devices
- Portable Devices
