MAX1693HEUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 444mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1693 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 25μA |
| Current - Output (Max) | 700mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | USB Switch |
| Supply Type | Single |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 60m Ω |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1693HEUB+ Overview
It is packaged in the form of a Tube.It is included in the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).Surface Mount is the mounting type of the LED driver.The switch type is USB Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is P-Channel volts.There are Status Flag features available on the LED driving board.This object belongs to the MAX1693 family.A total of 10 terminations can be found in it.The operation is carried out using the 10 pins.It is important to note that the LED driving board has 1 functions.The maximum output of the LED driving board is 700mAV.The maximum output current must drop to 1A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 10 pins.90mOhm resistance is present in the lighting driver.A maximum supply voltage of 5.5V is set in Vsup.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.
MAX1693HEUB+ Features
Supplied from 5V
Resistance of 90mOhm
1 channels
MAX1693HEUB+ Applications
There are a lot of Maxim Integrated MAX1693HEUB+ Power Switches ICs applications.
- Portable Devices
- PDAs
- Set-top-box
- HDD, SSD
- Wireless Modem Data Cards
- PC Card Hot Swap
- Notebook PC
- Notebook and Tablet Computers
- Mobile Communication Devices
- Portable Video Game Players
