MAX1693HEUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1693 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 25μA |
| Current - Output (Max) | 700mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | USB Switch |
| Supply Type | Single |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 60m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1693HEUB+T Overview
It is package in Tape & Reel (TR) case.The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.This switch is of type USB Switch.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Status Flag features.This object belongs to the MAX1693 family.A total of 10 terminations can be found in it.For operation, we use the 10 pins.As far as functions are concerned, the lighting driver has 1.The LED driver output is limited to 700mAV.The maximum output current drops to 1A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The lighting driver is mounted in the way of Surface Mount.10 pins are connected to it in total.In this LED driving board, there is 90mOhm resistance.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.
MAX1693HEUB+T Features
Supplied from 5V
Resistance of 90mOhm
1 channels
MAX1693HEUB+T Applications
There are a lot of Maxim Integrated MAX1693HEUB+T Power Switches ICs applications.
- Various applications equipped with buttons
- PC Cards
- Storage Drives
- Wireless/Networking Cards
- Smart Phones, Feature Phones
- Portable Music Players
- Set-top-box
- USB Protection
- Low Voltage I/O System Power
- Wearable Devices
