MAX1698AEUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Power Rating | 5W |
| Max Power Dissipation | 444mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1698 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Output Voltage | 60V |
| Max Output Current | 350mA |
| Power Supplies | 3/5V |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 444mW |
| Output Current | 350mA |
| Max Supply Current | 500μA |
| Max Output Voltage | 60V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | No |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1698AEUB+ Overview
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package saves space on the board. 1 outputs are designed into LED drivers.To mount, use Surface Mount.In this case, the DC DC Controller emerges as highly efficient and reliable.When the temperature is -40°C~85°C TA, it can work normally.It is clear that Backlight will benefit from the program.10 terminations are used in its operation.To form its configuration, 10 pins are used.The segment count is 1.It has been mounted on Surface Mount.LED drivers have a base part number of MAX1698.It is acceptable for the supply voltage to be 5.5V.There are 10 pins on this device.The Display Drivers is also assigned based on its characteristics.As its minimal input voltage, it operates at a voltage of 2.7V.It achieves maximum efficiency with a minimal voltage supply of 2.7V.In terms of supply current, there is a maximum value of 5.5V.The device can deliver high efficiency when the maximal supply current is less than 500μA.It is possible to supply the load with 350mA current.When operating with a maximum output current of 350mA, it can deliver all the benefits of a LED driver.It has a voltage of 60V.If the output voltage exceeds 60V, it should be corrected.
MAX1698AEUB+ Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Output voltage of 60V
MAX1698AEUB+ Applications
There are a lot of Maxim Integrated MAX1698AEUB+ LED Driver ICs applications.
- Stage Lighting and Signage
- High-end retail lighting
- LED Lighting PFCs, Linear Dimmable
- General lighting
- Down lighting
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- Street lighting
- LED Lightings for Inspection Devices
- A- lamps
