MAX1698EUB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 444mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1698 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Power Dissipation | 444mW |
| Output Current | 350mA |
| Max Supply Current | 500μA |
| Max Output Voltage | 1.33V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Min Output Voltage | 1.17V |
| Max Output Power | 5W |
| Internal Switch(s) | No |
| High Level Output Current | 200mA |
| Low Level Output Current | 200mA |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1698EUB Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package saves space on the board. 1 outputs are designed into LED drivers.The led light driver is mounted using Surface Mount.When it emerges as a DC DC Controller, it performs extremely well and is highly reliable.It is possible for the led driver ic to operate normally at -40°C~85°C TA.It is clear that Backlight will benefit from the program.There are 10 terminations that are designed to operate with it.This module has 10 pins as its base.There are estimated to be 1 segments.There is a device mounted on the Surface Mount.LED drivers can be found under the base part number MAX1698.10 pins are used on the device.In addition, it can be classified as Display Drivers according to its characteristics.At its minimal input voltage, it operates at 2.7V.In the event that the maximum supply current is allowed, it reaches 5.5V.This device is able to provide high efficiency when the maximal supply current should be less than 500μA.You can supply 350mA current to the load.In order to power systems, 5.5V voltage is needed.The voltage at the output terminal is 60V.The output voltage should not be in excess of 1.33V.A minimum voltage of 1.17V is maintained by its output.
MAX1698EUB Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Operating with the supply voltage of 5.5V
Output voltage of 60V
MAX1698EUB Applications
There are a lot of Maxim Integrated MAX1698EUB LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Amusement Machines
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Medical surgery lighting
- Sports Facility Lighting
- Dimmable LED for vehicle interiors
