MAX16990ATCC/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX16990 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 93 % |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX16990ATCC/V+ Overview
Capsuled in the 12-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~36V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~125°C TJ. This switching controller can switch at 220kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Enable, Frequency Control, Power Good provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at QUAD. A variety of 12 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 14V. Other relevant dc to dc converter ics will be returned if you search "MAX16990". Pins number 12 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Test statistics indicate DC regulator outputs 36V voltage. In most cases, the dc dc regulator's output current is 6A. This information should be noted when you begin working with the component. The duty cycle of the voltage regulator dc to dc can be set to 93 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. When running the voltage regulator dc to dc in a circuit, users should apply 42V to ensure safety and reliability. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator.
MAX16990ATCC/V+ Features
Transistor Driver Outputs
Switching Frequency: 220kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
MAX16990ATCC/V+ Applications
There are a lot of Maxim Integrated MAX16990ATCC/V+ DC to DC converter applications.
- Grinders
- Magnetohydrodynamic power
- Driver circuits
- CMM
- CNC system
- Industrial robots
- Electrical distribution systems
- Computer application technology
- Energy management systems
- Refrigerators of central air conditioners
