MAX16990AUBA/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | MAX16990 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 93 % |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX16990AUBA/V+ Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 4.5V~36V voltage are supplied and operated. Suitable for work in a -40°C~125°C TJ dc switcher. A switching controller such as this can switch at a value of 220kHz~1MHz . dc dc regulators can be carried out with Surface Mount. Current Limit, Enable, Frequency Control, Power Good is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . A variety of 10 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 14V. Search for "MAX16990" to find other relevant dc to dc converter ics. 10 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.5V. DC regulator outputs 36V voltage based on test statistics. You should note down the dc dc regulator's usual output current of 6A when you start a project. It is set to 93 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA frequency of 1MHz is used by the switching controller. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 42V. The dc to dc voltage regulator is from the Automotive, AEC-Q100 series.
MAX16990AUBA/V+ Features
Transistor Driver Outputs
Switching Frequency: 220kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 1MHz
MAX16990AUBA/V+ Applications
There are a lot of Maxim Integrated MAX16990AUBA/V+ DC to DC converter applications.
- Elevator lighting
- Medical monitoring systems
- Electric heating, lighting
- Surge protection circuits
- Power supplies of electronic gadgets
- Domestic water pumps
- Correction machines
- Solar power plants
- Low output voltage switching power supply circuits
- Game consoles
