MAX16992ATCD/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX16992 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX16992ATCD/V+ Overview
In the 12-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 4.5V~36V volts and has 4.5V~36V supply voltage. Work well in dc switchers with a -40°C~125°C TJ. The switching controller can be switched at 1MHz~2.5MHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. The 12 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 14V. You can find other relevant dc to dc converter ics by searching "MAX16992". 12 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.5V. Statistically, the DC regulator outputs 36V voltage. In most cases, the dc dc regulator's output current is 6A. This information should be noted when you begin working with the component. The maximum duty cycle of this voltage regulator dc to dc is set to 85 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Users should apply 42V to operate the voltage regulator dc to dc safely and reliably. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator.
MAX16992ATCD/V+ Features
Transistor Driver Outputs
Switching Frequency: 1MHz~2.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
MAX16992ATCD/V+ Applications
There are a lot of Maxim Integrated MAX16992ATCD/V+ DC to DC converter applications.
- ATMs
- Special machining machine tools
- Large fire protection systems
- Wide-range voltage regulation circuits
- Radio equipment
- Product burn-in
- Communication system
- Printing equipment
- Milling machines
- Scientific research
