MAX16992ATCE/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX16992 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX16992ATCE/V+ Overview
Capsuled in the 12-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. 4.5V~36V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 1MHz~2.5MHz. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at QUAD. 12 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 14V. In addition to "MAX16992", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 12. Switching converter is a special type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4.5V. Based on the test statistics, DC regulator outputs voltage 36V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 6A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 85 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. When running the voltage regulator dc to dc in a circuit, users should apply 42V to ensure safety and reliability. Thare are switch converters of the Automotive, AEC-Q100 series.
MAX16992ATCE/V+ Features
Transistor Driver Outputs
Switching Frequency: 1MHz~2.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
MAX16992ATCE/V+ Applications
There are a lot of Maxim Integrated MAX16992ATCE/V+ DC to DC converter applications.
- Textile machinery
- Photovoltaic power
- Balance equipment
- Remotely powered electric motors
- Direct power supply system
- Refrigerators of central air conditioners
- Game consoles
- Flaw detection equipment
- Mobile phones
- CNC system
