MAX16992ATCF/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX16992 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX16992ATCF/V+ Overview
Capsuled in the 12-WFQFN Exposed Pad package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 4.5V~36V. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 1MHz~2.5MHz. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. There are many different types of terminations for 12. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 14V. MAX16992 can be used to locate other relevant dc to dc converter ics. There are a total of 12 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4.5V. A 36V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 6A, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 85 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. When running the voltage regulator dc to dc in a circuit, users should apply 42V to ensure safety and reliability. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series.
MAX16992ATCF/V+ Features
Transistor Driver Outputs
Switching Frequency: 1MHz~2.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
MAX16992ATCF/V+ Applications
There are a lot of Maxim Integrated MAX16992ATCF/V+ DC to DC converter applications.
- Scientific testing
- Energy management systems
- seismic instrument power circuits
- Electrical distribution systems
- Nuclear power plants
- CNC system
- Remotely powered electric motors
- Correction machines
- Magnetohydrodynamic power
- Hydro power
