MAX16992AUBB/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 2.5MHz |
| Base Part Number | MAX16992 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX16992AUBB/V+ Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) are supported. A 4.5V~36V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 1MHz~2.5MHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . Various 10 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 14V. Searching "MAX16992" will return other relevant dc to dc converter ics. Pins number 10 of switching converter in total. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Based on the test statistics, DC regulator outputs voltage 36V. If you are starting a new project, you should note the dc dc regulator's typical output current is 6A. A duty cycle set at 85 % ensures voltage regulator dc to dc reliability during power-on and power-off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is 2.5MHz frequency setting on the switching controller. It is suggested that users apply 42V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator.
MAX16992AUBB/V+ Features
Transistor Driver Outputs
Switching Frequency: 1MHz~2.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 2.5MHz
MAX16992AUBB/V+ Applications
There are a lot of Maxim Integrated MAX16992AUBB/V+ DC to DC converter applications.
- Communication system
- Shearing machines
- ATMs
- Correction machines
- Domestic water pumps
- Cutting machine tools
- Network technology
- Boring machines
- Linear guide
- Medical monitoring systems
