MAX17006ETP+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR, ALSO OPERATES IN ADJUSTABLE MODE FROM 4.2 TO 4.4 V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 19V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX17006 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.2V |
| Input Voltage-Nom | 19V |
| Power Supplies | 19V |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1μA |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 26V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Nominal Input Voltage | 26V |
| Switcher Configuration | BUCK |
| Fault Protection | Over Current, Short Circuit |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 2 ~ 3 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 5A |
| Battery Pack Voltage | 12.6V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MAX17006ETP+ Overview
It is available in the package Tube.Located in package 20-WFQFN Exposed Pad, it can be found there.This device is mounted using type Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.Analog IC SWITCHING REGULATOR is responsible for implementing the device.Charge the device by providing it with Constant - Programmable current.By using the base part number MAX17006, related parts can be found for this device.I have found that the number of terminations found in it as a whole is 20.For the battery pack, it is set to 12.6V.It is equipped with 20 pins.At the maximum charging current, it has a rating of 5A.There are 20 pins necessary to make it work.There is a possibility that it can be powered by a 19V battery.The board is capable of handling a voltage input of zero volts.The possibility of optimal efficiency exists if 4.2V output voltage is used as the output voltage.This device belongs to the subcategory of Power Management Circuits.At a low supply voltage, such as 8V, it can operate to the best of its ability.A mounting requires that it align itself with Surface Mount.6mA is set for Vsup (maximum supply voltage).The power supply for this part is set to 19V.A 1μA supply current is set on the gadget.There is 19V voltage input on the device.It can accept a maximum input voltage of 26V volts.It is also possible to generate additional features with this device that are similar to those of ALSO OPERATES AS LDO REGULATOR, ALSO OPERATES IN ADJUSTABLE MODE FROM 4.2 TO 4.4 V.
MAX17006ETP+ Features
Battery pack voltage of 12.6V
Power Management Circuits subcategory
Addtional features of ALSO OPERATES AS LDO REGULATOR, ALSO OPERATES IN ADJUSTABLE MODE FROM 4.2 TO 4.4 V
20-WFQFN Exposed Pad package
MAX17006ETP+ Applications
There are a lot of Maxim Integrated MAX17006ETP+ Battery Chargers ICs applications.
- Material handling
- Wireless power
- Electric tour bus
- Electric lift car
- Rental fleets
- Cellphones
- Electrical Utility industry
- Remote powered communication and telemetry systems
- Remote sensor
- Model aircraft
