MAX17041G+U
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -20°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.333W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Output Voltage | 30mV |
| Operating Supply Voltage | 4.5V |
| Temperature Grade | OTHER |
| Number of Channels | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 75μA |
| Output Current | 75μA |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 0.075mA |
| Number of Cells | 2 |
| Height | 800μm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
MAX17041G+U Overview
Analog IC POWER SUPPLY MANAGEMENT CIRCUIT is used in this power IC. The number of channels available is 1. The smart tools battery has 8 pins in total. The case is labeled Tube. The electrical component must be mounted with Surface Mount. A voltage of at least 2.5V volts is required on this electric component. An electronic component in this family is a Power Management Circuits. This power IC's supplied voltage should not exceed 4.5V volts. It should not be less than -20°C in order to activate this power management IC. Temperatures less than 70°C degrees Celsius are recommended for use. It is imperative to keep this transceiver ic set to 3.6V at all times. On it, there are 8 pins. A maximum current supply (Isup) of 0.075mA is permitted. In this power management IC, the operating supply voltage is set to 4.5V. 75μA is the maximum current the power ICs can accept. A supply current of 75μA volts is required to operate it.
MAX17041G+U Features
with 8 Pins
operate supply voltage at the range of 3.6V
Output Voltage at the range of 30mV
MAX17041G+U Applications
There are a lot of Maxim Integrated MAX17041G+U Battery Management ICs applications.
- Grid support
- Monitoring the battery
- Weather stations
- UAV
- Medical & healthcare
- ADAS ECU
- Leisure
- Chargers 50 kW to 350 kW
- Continually optimizing battery performance
- Distributed energy resources
