MAX17047G+
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 10 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 4.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 1.9512W |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Current - Output | 200nA |
| Adjustable Threshold | NO |
| Voltage - Output | 400mV |
| Supply Current-Max (Isup) | 0.042mA |
| Number of Cells | 1 |
| Max Junction Temperature (Tj) | 150°C |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
MAX17047G+ Overview
Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this power IC. It is possible to access 1 channels. The total number of pins is 10. To mount this electronic component, use Surface Mount. It is recommended that this electric part's minimum supply voltage not be less than 2.5V volts. The electronic component belongs to the Power Management Circuits family. Its supply voltage should not exceed 4.5V volts. Activation of this smart tools battery requires a value greater than 0. The electronic battery should be used below 85°C degrees Celsius. It is recommended that this battery protection IC be set to 3.6V at all times. The power IC has a total of 10 pins. Ensure that the maximum supply current (Isup) is below 0.042mA. A voltage of 4.5V is specified as the operating supply voltage for this battery instrument. The output voltage is 400mV. This smart tools battery runs on a voltage of 25μA volts.
MAX17047G+ Features
with 10 Pins
operate supply voltage at the range of 3.6V
MAX17047G+ Applications
There are a lot of Maxim Integrated MAX17047G+ Battery Management ICs applications.
- Submarines
- Passenger cars
- Motor drive - 3 phase AC100V-240V AC servo
- Multicopter and drones
- Main inverter
- Monitoring the battery
- Golf carts
- Electric vehicles
- Scooters
- Power supplies
