MAX1714AEEP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1714 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Input Voltage (Min) | 2V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 450kHz 600kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 600kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1714AEEP+T Overview
With its 20-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~5.5V. Qualified to work in a -40°C~85°C TA dc switcher. It can switch at 200kHz 300kHz 450kHz 600kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Current Limit, Enable, On Time Control, Power Good which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. 20 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. Searching "MAX1714" will return other relevant dc to dc converter ics. 20 pins are present on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. This dc dc voltage regulator should be powered by a voltage of 2V. Statistically, the DC regulator outputs 5.5V voltage. The dc to dc regulator can only accept a maximum input voltage of 28V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 3A. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulators have a maximum frequency of 600kHz.
MAX1714AEEP+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 450kHz 600kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
MAX1714AEEP+T Applications
There are a lot of Maxim Integrated MAX1714AEEP+T DC to DC converter applications.
- Arc suppression circuits
- Injection molding machinery
- Textile machinery
- Hydrogen power
- Current source circuits
- Surge protection circuits
- Printing
- Smoke exhaust equipment
- Die casting equipment
- PSRR circuits
