MAX1714BEEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 288.002805mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1714 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Input Voltage (Min) | 2V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 450kHz 600kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 600kHz |
| Max Duty Cycle | 100 % |
| Clock Sync | No |
| Height | 1.651mm |
| Length | 4.98mm |
| Width | 3.99mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1714BEEE+ Overview
With a 16-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~5.5V is the supply voltage and the operating voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. The switching controller is capable of switching at the 200kHz 300kHz 450kHz 600kHz position. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, On Time Control, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. A variety of 16 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Other relevant dc to dc converter ics will be returned if you search "MAX1714". 16 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the dc dc voltage regulator's minimum input voltage be 2V. Based on the test statistics, DC regulator outputs voltage 5.5V. A maximum voltage of 28V is accepted by the dc to dc regulator as an input voltage. You should note down the dc dc regulator's usual output current of 3A when you start a project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. It is estimated that this dc regulatorhas a maximum frequency of 600kHz.
MAX1714BEEE+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 450kHz 600kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX1714BEEE+ Applications
There are a lot of Maxim Integrated MAX1714BEEE+ DC to DC converter applications.
- Motor controller circuits
- Computer rooms
- Special machining machine tools
- Pipe bending machines
- Correction machines
- Product testing
- Refrigerators of central air conditioners
- Surface processing equipment
- Emergency lighting monitoring equipment
- Communication system
