MAX1714BEEE+T
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1714 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Input Voltage (Min) | 2V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 450kHz 600kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 600kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
MAX1714BEEE+T Overview
With its 16-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). A 4.5V~5.5V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. It can switch at 200kHz 300kHz 450kHz 600kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, On Time Control, Power Good for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Other relevant dc to dc converter ics can be found by searching "MAX1714". In total, switching converter has 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the input voltage of the dc dc voltage regulator be 2V. According to the test statistics, DC regulator outputs 5.5V voltage. The dc to dc regulator can only accept 28V input voltage. You should note that the dc dc regulator's usual output current is 3A. DC switcher's Surface Mount qualifies it for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 600kHz.
MAX1714BEEE+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 450kHz 600kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
MAX1714BEEE+T Applications
There are a lot of Maxim Integrated MAX1714BEEE+T DC to DC converter applications.
- Computer monitoring equipment of building
- Production lines
- SMT equipment
- Low output voltage switching power supply circuits
- Servo drive system
- Printing equipment
- Industrial controllers
- Sink circuits
- Handheld GPS
- Digital video recorders
