MAX1715EEI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 540kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1715 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 8A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 8A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 1.1mA |
| Output Power | 640mW |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 2V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 420kHz 540kHz |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1715EEI+ Overview
Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. 2 outputs are supported by the dc motor controller. There is a Tube solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~5.5V volts and has 4.5V~5.5V supply voltage. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 200kHz 300kHz 420kHz 540kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, On Time Control, Power Good. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 28 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 5V. Other relevant dc to dc converter ics can be found by searching "MAX1715". There are a total of 28 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, the DC regulator outputs 5.5V voltage. If you start a project, note down the dc dc regulator's usual output current of 8A. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers operate at 540kHz frequencies. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5.5V. In a dormant state, the dc switching uses 1.1mA. In order to limit the voltage of a dc switcher whose maximum input voltage is 28V, it must be limited by the user. The supply voltage must be 2V. There will be 8A current output from the dc switcher above 8A. At its maximum, the switching converter can output 5.5V volts. A voltage controller's lowest output voltage cannot be less than 1V.
MAX1715EEI+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 420kHz 540kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 540kHz
MAX1715EEI+ Applications
There are a lot of Maxim Integrated MAX1715EEI+ DC to DC converter applications.
- Production lines
- Plate bending machines
- Grinders
- SMT equipment
- Motor controller circuits
- Correction machines
- Energy management systems
- Imported equipment
- Series voltage regulation circuits
- Pipe bending machines
