MAX1715EEI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX1715 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Output Power | 640mW |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 420kHz 540kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.89mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1715EEI Overview
It comes in the 28-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. PMIC packaging is solid with a Tube enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~5.5V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. Using this switching controller, it is possible to switch at 200kHz 300kHz 420kHz 540kHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, On Time Control, Power Good. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 28 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 5V. Other relevant dc to dc converter ics can be found by searching "MAX1715". Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 4.5V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most.
MAX1715EEI Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 420kHz 540kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
MAX1715EEI Applications
There are a lot of Maxim Integrated MAX1715EEI DC to DC converter applications.
- Textile machinery
- Laboratories
- Injection molding machinery
- Ball screw pair
- Lathes
- Electric heating, lighting
- Sink circuits
- Various precision measuring detectors
- Energy management systems
- Drilling machines
