MAX1715EEI+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1715 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 420kHz 540kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 620kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1715EEI+T Overview
The switching controller fits in the 28-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.5V~5.5V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 200kHz 300kHz 420kHz 540kHz. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, On Time Control, Power Good. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 28. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Search for "MAX1715" to find other relevant dc to dc converter ics. 28 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 2.5V volts. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 620kHz on this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 5.5V.
MAX1715EEI+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 420kHz 540kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
MAX1715EEI+T Applications
There are a lot of Maxim Integrated MAX1715EEI+T DC to DC converter applications.
- Automation technology
- Surge protection circuits
- Wide-range voltage regulation circuits
- Balance equipment
- Sensitive electronic devices
- Boring machines
- Digital video recorders
- Low output voltage switching power supply circuits
- Elevator lighting
- Laboratories
