MAX1716EEG+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1716 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2V~28V |
| Control Features | Current Limit, Enable, On Time Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 400kHz 550kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1716EEG+ Overview
The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2V~28V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 200kHz 300kHz 400kHz 550kHz. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Current Limit, Enable, On Time Control for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 24 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. A search for "MAX1716" will reveal other relevant dc to dc converter ics. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. The dc to dc regulator is limited to 5.5V input voltage. DC to DC voltage regulator has the value of ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V to better satisfy the requirement.
MAX1716EEG+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 400kHz 550kHz
Current Limit, Enable, On Time Control
PULSE WIDTH MODULATION
ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V
MAX1716EEG+ Applications
There are a lot of Maxim Integrated MAX1716EEG+ DC to DC converter applications.
- Arc suppression circuits
- Communication system
- Motor controller circuits
- Solar power plants
- PSRR circuits
- Energy management systems
- Computer monitoring equipment of building
- Geothermal power
- Special machining machine tools
- Various precision measuring instruments
