MAX1717EEG+
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Output Voltage | 2V |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 14A |
| Input Voltage (Min) | 4.5V |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 100 % |
| Number of Output Phases | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1717EEG+ Overview
Capsuled in the QSOP package, the switching controller can be used for a wide range of applications. The pmic is packaged in Tube solid enclosure. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. 24 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 5V. Switching converter has a total of 24 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 2V. You should note down the dc dc regulator's usual output current of 14A when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. This dc regulatorhas a max frequency of 1MHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V. Users should apply 5.5V to operate the voltage regulator dc to dc safely and reliably. Temperatures should be kept at -40°C or higher. DC regulator should run at a temperature of 85°C more than 85°C degrees Celsius. 1 functions (s) are included in the switch converters. A voltage regulators switching with 24 pins is designed. Phases of this controller are 1. The frequency at which this controller performs well is 1MHz.
MAX1717EEG+ Features
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V
Switching Frequency: 1MHz
MAX1717EEG+ Applications
There are a lot of Maxim Integrated MAX1717EEG+ DC to DC converter applications.
- Household control circuits
- Elevator lighting
- Grinders
- Post equipment
- Lathes
- Various precision measuring instruments
- Industrial controllers
- Magnetohydrodynamic power
- Mobile phones
- Serial communication converter
