MAX1717EEG+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX1717 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 2V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Current Limit, Enable, On Time Control, Slew Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz 550kHz 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1717EEG+T Overview
In the 24-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). dc controls with 4.5V~5.5V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. This switching controller can switch at 200kHz 300kHz 550kHz 1MHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Current Limit, Enable, On Time Control, Slew Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 24 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. MAX1717 can be searched for other relevant dc to dc converter ics. There are 24 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 2V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 14A, so you should note it down when starting a new project. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. The max frequency of the pmic can reach 1MHz. For better satisfaction, the value of DC to DC voltage regulator is ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V. A circuit should contain 5.5V in order to ensure the voltage regulator dc to dc runs safely and reliably.
MAX1717EEG+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 550kHz 1MHz
Current Limit, Enable, On Time Control, Slew Control
PULSE WIDTH MODULATION
ALSO REQUIRES A BATTERY VOLTAGE FROM 2 TO 28V
MAX1717EEG+T Applications
There are a lot of Maxim Integrated MAX1717EEG+T DC to DC converter applications.
- Game consoles
- Smoke exhaust equipment
- Various precision measuring detectors
- Injection molding machinery
- Smart grid
- ATMs
- Network technology
- Planers
- Experimental setup
- Energy management systems
