Parameters |
Mounting Type |
Surface Mount |
Package / Case |
6-WDFN |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Bulk |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
357.8mW |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX17220 |
JESD-30 Code |
S-PDSO-N6 |
Function |
Step-Up |
Number of Outputs |
1 |
Output Voltage |
5V |
Output Type |
Adjustable |
Voltage - Input (Min) |
0.4V |
Input Voltage-Nom |
1.5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
400mV |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
225mA Switch |
Voltage - Output (Min/Fixed) |
1.8V |
Topology |
Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
2.5MHz |
Control Technique |
PULSE FREQUENCY MODULATION |
Synchronous Rectifier |
Yes |
Max Duty Cycle |
75 % |
Max Junction Temperature (Tj) |
150°C |
Height |
800μm |
Length |
2mm |
Width |
2mm |
RoHS Status |
ROHS3 Compliant |
MAX17220ELT+ Overview
optimized performance is achieved by utilizing the Bulk package in this voltage regulator. During the development of this harley voltage regulator, 6 terminations were made. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. For space-saving purposes, this voltage regulator is available in the 6-WDFN package. There are 1 outputs configured on the voltage regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. Surface Mount-mount switching regulator. The operating temperature should be kept at -40°C~85°C TA when the voltage regulator 12v is in operation. 2.5MHz is the switching frequency of this DC-DC switching regulator. Despite its low input voltage, this voltage regulator can operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.8V. It features maximum design flexibility due to dc to dc voltage regulator's 225mA Switch output current. A regulator with this NOT SPECIFIED peak reflow temperature is essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 1.5V is provided. There is a DC/DC regulator in this family that belongs to the MAX17220 family. At 5V volts, voltage regulator can provide voltage. In this case, a dc to dc voltage regulator's minimum supply voltage of 400mV volts is required to ensure reliable performance. As long as the supply voltage is greater than 5.5V, the voltage regulator 12v will operate correctly.
MAX17220ELT+ Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
MAX17220ELT+ Applications
There are a lot of Maxim Integrated MAX17220ELT+ Voltage Regulators applications.
- Large fire protection systems
- Alternators
- Solar power plants
- Emergency lighting monitoring equipment
- Domestic water pumps
- Bending machines
- Analog precision reference circuits
- Arc suppression circuits
- Constant current circuits
- Experimental setup