MAX1724EZK50+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1724 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 150mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 0.8V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 400mA Switch |
| Max Output Voltage | 5.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2V |
| Nominal Output Voltage | 5V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1724EZK50+T Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. There are 5 terminations in this harley voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this harley voltage regulator is available in the SOT-23-5 Thin, TSOT-23-5 package. DC DC switching regulator is configured with 1 outputs. Fixed outputs are generated on the output pins of this adjusting voltage regulator. This switching regulator is designed to fit the Surface Mount mounting system. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. This voltage regulator is able to operate with the minimal input voltage of 0.8V. DC DC switching regulator's 400mA Switch output current allows for maximum design flexibility. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. This voltage regulator is included in the Switching Regulator or Controllers subcategory. DC/DC regulators of this type are part of the MAX1724 family of voltage regulator 12vs. There is a possibility that DC DC switching regulator can give voltage at 5V volts. The switching regulator operation of the system is controlled by 5 pins. For this switching regulator, it is recommended that the output voltage is at least 2V volts. Accordingly, dc to dc voltage regulator's maximum output current is 150mA A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 5.5V. With a supply voltage of 5.5V, this harley voltage regulator works. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 800mV V is required. The maximum supply voltage for the voltage regulator 12v is 5.5V, so DC DC switching regulator can operate with a maximum voltage of 5.5V.
MAX1724EZK50+T Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
Operating supply voltage of 5.5V
MAX1724EZK50+T Applications
There are a lot of Maxim Integrated MAX1724EZK50+T Voltage Regulators applications.
- Television equipment
- Automatic plug-in machines
- Magnetohydrodynamic power
- Drilling machines
- Balance equipment
- Smoke prevention equipment
- Electrical distribution systems
- Electrical power transmission
- Sensitive electronic devices
- Electric water heaters
