MAX1744AUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES AT 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1744 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 330kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 330kHz |
| Duty Cycle (Max) | 100% |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1744AUB+ Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~36V. Work well in dc switchers with a -40°C~125°C TJ. The switching controller is capable of switching at the Up to 330kHz position. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Enable for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 10. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5.5V. MAX1744 can be searched for other relevant dc to dc converter ics. In total, switching converter has 10 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 3.3V voltage. You should note down the dc dc regulator's usual output current of 10A when you start a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 330kHz. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES AT 5V. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 36V.
MAX1744AUB+ Features
Transistor Driver Outputs
Switching Frequency: Up to 330kHz
Enable
PULSE WIDTH MODULATION
ALSO OPERATES AT 5V
MAX1744AUB+ Applications
There are a lot of Maxim Integrated MAX1744AUB+ DC to DC converter applications.
- Emergency lighting monitoring equipment
- Thermal power
- Household control circuits
- Special machining machine tools
- Magnetohydrodynamic power
- Low output voltage switching power supply circuits
- Domestic water pumps
- Flexible manufacturing cells
- Motor controller circuits
- Electrical distribution systems
