MAX1744EUB+
| Parameters | |
|---|---|
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 330kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 330kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1744 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
MAX1744EUB+ Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 4.5V~36V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~85°C TA dc switcher before. This switching controller can switch at Up to 330kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Enable for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 10 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5.5V. Other relevant dc to dc converter ics can be found by searching "MAX1744". The switching converter has a total of 10 pins. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 5V. A maximum voltage of 36V is accepted by the dc to dc regulator as an input voltage. You should note down the dc dc regulator's usual output current of 10A when you start a project. A frequency of 330kHz is used by the switching controller. This value is ALSO OPERATES AT 5V so that DC to DC voltage regulator better serves the purpose.
MAX1744EUB+ Features
Transistor Driver Outputs
Switching Frequency: Up to 330kHz
Enable
PULSE WIDTH MODULATION
Frequency: 330kHz
ALSO OPERATES AT 5V
MAX1744EUB+ Applications
There are a lot of Maxim Integrated MAX1744EUB+ DC to DC converter applications.
- PSRR circuits
- Production lines
- Automatic testing equipment
- Surface processing equipment
- Energy management systems
- Driver circuits
- Large fire protection systems
- Handheld GPS
- Precision electronic equipment
- Household control circuits
