MAX1744EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1744 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 330kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 330kHz |
| Max Duty Cycle | 100 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1744EUB+T Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~36V. Suitable for working in an dc switcher that has a -40°C~85°C TA. A switching controller such as this can switch at a value of Up to 330kHz . As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 10 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5.5V. MAX1744 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 10 pins. Switching converter type is specifically Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 3.3V. You should note that the dc dc regulator's usual output current is 10A. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator's maximum frequency is 330kHz. It is suggested that users apply 36V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
MAX1744EUB+T Features
Transistor Driver Outputs
Switching Frequency: Up to 330kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX1744EUB+T Applications
There are a lot of Maxim Integrated MAX1744EUB+T DC to DC converter applications.
- Low output voltage switching power supply circuits
- Drilling machines
- Computer-related products
- Hydrogen power
- Various precision measuring detectors
- Direct power supply system
- Network technology
- Printing equipment
- Power supplies of electronic gadgets
- Balance equipment
