MAX1744EUB/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES AT 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1744 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Output Power | 50W |
| Control Features | Enable |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 330kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 330kHz |
| Max Duty Cycle | 100 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX1744EUB/V+ Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. A solid enclosure of Tube surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 4.5V~36V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to Up to 330kHz. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 5.5V. MAX1744 can be used to locate other relevant dc to dc converter ics. Total pins of switching converter are 10. In particular, switching converter is a type of Switching Regulator or Controllers. A 5V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 10A. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 330kHz is the maximum frequency of this dc regulators. As a result, DC to DC voltage regulator has a value of ALSO OPERATES AT 5V so that the need can be met more directly. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 36V. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series.
MAX1744EUB/V+ Features
Transistor Driver Outputs
Switching Frequency: Up to 330kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ALSO OPERATES AT 5V
MAX1744EUB/V+ Applications
There are a lot of Maxim Integrated MAX1744EUB/V+ DC to DC converter applications.
- Textile machinery
- Automation technology
- Refrigerators of central air conditioners
- Computer rooms
- Correction machines
- Precision electronic equipment
- USB circuits
- Plate bending machines
- Handheld GPS
- Series voltage regulation circuits
