MAX1745EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 330kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1745 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable |
| Max Output Voltage | 18V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 330kHz |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.25V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1745EUB+ Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~36V. A -40°C~85°C TA dc switcher is not a problem. It can switch at Up to 330kHz. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 10 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5.5V. Search for "MAX1745" to find other relevant dc to dc converter ics. The switching converter has a total of 10 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, the DC regulator outputs 18V voltage. The dc dc regulator's usual output current is 10A, which should be noted down when you start a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 330kHz Hz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 36V. The dc switcher's maximum input voltage is 36V, so users must limit the voltage accordingly. DC switchers cannot produce output currents greater than 10A. Its datasheet indicates the switching converter can output a maximum of 18V volts. A voltage controller's lowest output voltage cannot be less than 1.25V.
MAX1745EUB+ Features
Transistor Driver Outputs
Switching Frequency: Up to 330kHz
Enable
PULSE WIDTH MODULATION
Frequency: 330kHz
MAX1745EUB+ Applications
There are a lot of Maxim Integrated MAX1745EUB+ DC to DC converter applications.
- Computer application technology
- Fire elevators
- Textile machinery
- Production lines
- Domestic water pumps
- Servo drive system
- Direct power supply system
- Adjustable voltage or current linear circuits
- Computer-related products
- Boring machines
