MAX17498BATE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Bulk |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX17498 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 65V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | EN, Power Good, Soft Start |
| Max Output Voltage | 65V |
| Topology | Boost, Flyback |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 1.25V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Voltage |
| Max Duty Cycle | 92 % |
| Output Isolation | Either |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX17498BATE+ Overview
This ac to dc converter is included in the package 16-WFQFN Exposed Pad .In Bulk AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.In this AC to DC transformer, the switching frequency is 500kHz .This AC/DC converter is suitable for operation in the range of 4.5V~36V supply voltage (Vcc/Vdd).Total terminations are 16 .The ac/dc converter has a total of 16 pins.There are 16 pins in total.A similar acdc converter can be searched by using the MAX17498 family.There are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .The output current is set to 2A .Its output voltage is65V .You can read the standard of REACH SVHC : Unknown .An input voltage of 36V is available for powering the AC to DC converter.An input voltage of less than 4.5V volts can be used with the AC to DC inverter.
MAX17498BATE+ Features
Packaged with 16-WFQFN Exposed Pad
Switching Frequency at 500kHz
With 16 pins
Output Current at 2A
MAX17498BATE+ Applications
There are a lot of Maxim Integrated MAX17498BATE+ AC DC Converters applications.
- Chargers for cell/cordless phones
- Standby and Auxiliary Power Supplies
- Rice Cooker
- Charger
- Standby Power Supply
- RCC SMPS
- Standby power supplies for VCR
- AC?DC USB chargers for Cell Phones
- Set -Top Box (STB) Power Supply
- Tablets
