MAX17499BAUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 625kHz |
| Base Part Number | MAX17499 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 50μA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 50μA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~24V |
| Control Features | Enable |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~2.5MHz |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 12V |
| Max Duty Cycle | 75 % |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MAX17499BAUB+ Overview
It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 9.5V~24V. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 50kHz~2.5MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Enable for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 10 terminations with various dc switching's functions. Search for "MAX17499" to find other relevant dc to dc converter ics. There are 10 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. DC regulator outputs 1.5V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 50μA when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 75 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers operate at 625kHz frequencies. When running the voltage regulator dc to dc in a circuit, users should apply 9.5V to ensure safety and reliability. You can set the input voltage to 12V for nominal working status. A current of 50μA is supplied to it.
MAX17499BAUB+ Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Enable
Max Duty Cycle: 75 %
Frequency: 625kHz
MAX17499BAUB+ Applications
There are a lot of Maxim Integrated MAX17499BAUB+ DC to DC converter applications.
- Magnetohydrodynamic power
- Machining centers
- Automatic plug-in machines
- Arc suppression circuits
- Motor controller circuits
- Pipe bending machines
- Alternators
- seismic instrument power circuits
- Lathes
- Large fire protection systems
