MAX17499BEUB+
| Parameters | |
|---|---|
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 625kHz |
| Max Duty Cycle | 75 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX17499 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100nA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~24V |
| Control Features | Enable |
| Input Voltage (Min) | 9.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
MAX17499BEUB+ Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 9.5V~24V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. This switching controller can switch at 50kHz~2.5MHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of 10 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "MAX17499". 9.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 800mV. In most cases, the output current of the dc dc regulator will be 100nA, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 75 % to ensure reliability during power-up and power-down. The max frequency of the pmic can reach 625kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 24V to the voltage regulator dc to dc. With a current supply of 2mA, it runs.
MAX17499BEUB+ Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
MAX17499BEUB+ Applications
There are a lot of Maxim Integrated MAX17499BEUB+ DC to DC converter applications.
- CNC system
- Current source circuits
- PSRR circuits
- USB circuits
- Die casting equipment
- Photovoltaic power
- Precision electronic equipment
- Scientific research
- Hydrogen power
- ATMs
