MAX17500AEUB+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX17500 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 265V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100nA |
| Voltage - Supply (Vcc/Vdd) | 23.6V~30V |
| Control Features | Enable |
| Input Voltage (Min) | 9V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~2.5MHz |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 625kHz |
| Max Duty Cycle | 50 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX17500AEUB+ Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 23.6V~30V volts and has 23.6V~30V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 50kHz~2.5MHz. dc dc regulators can be carried out with Surface Mount. Enable is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of 10 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Search for "MAX17500" to find other relevant dc to dc converter ics. It is recommended that the dc dc voltage regulator's minimum input voltage be 9V. DC regulator outputs 800mV voltage according to the test statistics. It should be fully noted that the dc to dc regulator only accepts 24V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 100nA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. This dc regulatorhas a max frequency of 625kHz. It is suggested that users apply 265V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. It runs on a supply current of 2mA.
MAX17500AEUB+ Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
MAX17500AEUB+ Applications
There are a lot of Maxim Integrated MAX17500AEUB+ DC to DC converter applications.
- Electric water heaters
- Series voltage regulation circuits
- Pipe bending machines
- Digital precision reference circuits
- Refrigerators of central air conditioners
- Product testing
- Machining centers
- Nuclear power plants
- Post equipment
- Shearing machines
