MAX17500BAUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 444.4W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 625kHz |
| Base Part Number | MAX17500 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.5V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 50μA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 50μA |
| Voltage - Supply (Vcc/Vdd) | 23.6V~30V |
| Control Features | Enable |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~2.5MHz |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 12V |
| Max Duty Cycle | 75 % |
| RoHS Status | ROHS3 Compliant |
MAX17500BAUB+ Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 23.6V~30V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~125°C TJ dc switcher. The switching controller can be switched at 50kHz~2.5MHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 10. You can find other relevant dc to dc converter ics by searching "MAX17500". There are only 10 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Test statistics indicate DC regulator outputs 1.5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 50μA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 75 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 625kHz is the frequency of the switching controller. 12V is the nominal working voltage. A supply current of 50μA is used to power it.
MAX17500BAUB+ Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Enable
Max Duty Cycle: 75 %
Frequency: 625kHz
MAX17500BAUB+ Applications
There are a lot of Maxim Integrated MAX17500BAUB+ DC to DC converter applications.
- ATMs
- Thermal power
- Wide-range voltage regulation circuits
- Experimental setup
- Computer monitoring equipment of building
- Industrial controllers
- Ball screw pair
- Emergency lighting monitoring equipment
- Flaw detection equipment
- Adjustable voltage or current linear circuits
