MAX17500BEUB+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 23.6V~30V |
| Control Features | Enable |
| Input Voltage (Min) | 9V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~2.5MHz |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 75% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
MAX17500BEUB+ Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. A 23.6V~30V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. There is a switch at 50kHz~2.5MHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 10 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. This dc dc voltage regulator should be powered by a voltage of 9V. Voltages 24V are the maximum that the dc to dc regulator will accept.
MAX17500BEUB+ Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Enable
PULSE WIDTH MODULATION
MAX17500BEUB+ Applications
There are a lot of Rochester Electronics, LLC MAX17500BEUB+ DC to DC converter applications.
- Smart grid
- Production lines
- Product burn-in
- Planers
- Machining centers
- Industrial robots
- Precision electronic equipment
- Flaw detection equipment
- Ball screw pair
- Linear guide
