MAX17596ATE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | MAX17596 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.9V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Clock Sync | Yes |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX17596ATE+ Overview
With a 16-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 1 output generation. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~36V voltage are supplied and operated. Worked in a -40°C~125°C TJ dc switcher before. Switching can be done at 100kHz~1MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position QUAD . Various 16 terminations. Other relevant dc to dc converter ics can be found by searching "MAX17596". The switching converter has a total of 16 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 4.9V voltage of DC regulator was detected in the test statistics. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controller operates at 1MHz Hz. To run the voltage regulator dc to dc safely and reliably, users should apply 5V to the voltage regulator dc to dc. A current of 2mA is supplied to it.
MAX17596ATE+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 50 %
Frequency: 1MHz
MAX17596ATE+ Applications
There are a lot of Maxim Integrated MAX17596ATE+ DC to DC converter applications.
- Computer monitoring equipment of building
- Sink circuits
- Smart grid
- Analog precision reference circuits
- Alternators
- Access control systems
- Injection molding machinery
- Driver circuits
- Television equipment
- Automatic plug-in machines
