MAX17597ATE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 1998 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | MAX17597 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.9V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Max Duty Cycle | 94 % |
| Duty Cycle (Max) | 92.5% |
| Clock Sync | Yes |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX17597ATE+ Overview
In the 16-WFQFN Exposed Pad package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~36V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 100kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the QUAD position. 16 terminations with a variety of function. MAX17597 can be used to locate other relevant dc to dc converter ics. There are 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Test statistics indicate DC regulator outputs 4.9V voltage. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. The maximum duty cycle of this voltage regulator dc to dc is set to 94 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. A frequency of 1MHz is set for the switching controller. When running the voltage regulator dc to dc in a circuit, users should apply 5V to ensure safety and reliability. A current of 2mA is supplied to it.
MAX17597ATE+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 94 %
Frequency: 1MHz
MAX17597ATE+ Applications
There are a lot of Maxim Integrated MAX17597ATE+ DC to DC converter applications.
- Automation technology
- Household control circuits
- Adjustable voltage or current linear circuits
- Hydrogen power
- Grinders
- Network technology
- Radio equipment
- Alternators
- Gear/thread machining machines
- Balance equipment
