MAX17599ATE+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX17599 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.9V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Dead Time Control, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 74 % |
| Duty Cycle (Max) | 72.5% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX17599ATE+ Overview
With its 16-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tube enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 4.5V~36V. Suitable for work in a -40°C~125°C TJ dc switcher. A switching controller such as this can switch at a value of 100kHz~1MHz . dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Enable, Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. There are a QUAD terminal on the switching converters. A variety of dc switching's functions can be performed on 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics will be returned if you search "MAX17599". Switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 4.9V voltage. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 74 % duty cycle are designed to be reliable when powered on and powered off. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 1MHz for this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 36V to ensure safety and reliability. The supply current of the voltage controller is 2mA.
MAX17599ATE+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Dead Time Control, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 74 %
MAX17599ATE+ Applications
There are a lot of Maxim Integrated MAX17599ATE+ DC to DC converter applications.
- Scientific testing
- Hydraulic presses
- Various precision measuring instruments
- Alternators
- Laboratories
- Power supplies of electronic gadgets
- Imported equipment
- Various precision measuring detectors
- Printing equipment
- Large fire protection systems
