MAX17603ASA+
| Parameters | |
|---|---|
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 588.2mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | MAX17603 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Element Configuration | Dual |
| Nominal Supply Current | 1A |
| Output Current | 4A |
| Input Type | Inverting |
| Turn On Delay Time | 12 ns |
| Rise Time | 6ns |
| Fall Time (Typ) | 5 ns |
| Turn-Off Delay Time | 12 ns |
| Rise / Fall Time (Typ) | 40ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2V 4.25V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
MAX17603ASA+ Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.Tube represents the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~14V.This device is designed with a N-Channel MOSFET gate type.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Inverting.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number MAX17603.Mosfet driver is mounted using the Surface Mount method.During design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.The maximum output current can amount to 4A.A board with 8 component pins is available.The output current can be set to 4A.Its maximum power dissipation of 588.2mW also demonstrates its maximum ability to transfer power without overheating.
MAX17603ASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 588.2mW
MAX17603ASA+ Applications
There are a lot of Maxim Integrated MAX17603ASA+ gate drivers applications.
- Commercial air-conditioning (CAC)
- 3-Phase Motor Inverter Driver
- serial peripheral interface (SPI), I2C
- Industrial Power Supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Telecom switch mode power supplies
- DC-DC Converters
- PCMCIA applications
- Isolated Supplies for Motor Control
- High power buffers
