MAX1761EEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1761 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 1.8V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~20V |
| Control Features | Enable |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz 350kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 428kHz |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1761EEE+T Overview
It comes in the 16-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.5V~20V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~85°C TA dc switcher before. A switching controller such as this can switch at a value of 250kHz 350kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Searching "MAX1761" will return other relevant dc to dc converter ics. There are only 16 pins on switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Statistically, the DC regulator outputs 1.8V voltage. You should note that the dc dc regulator's usual output current is 600mA. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator428kHz has the maximum frequency. To operate the voltage regulator dc to dc safely and reliably, users should apply 20V.
MAX1761EEE+T Features
Transistor Driver Outputs
Switching Frequency: 250kHz 350kHz
Enable
PULSE WIDTH MODULATION
MAX1761EEE+T Applications
There are a lot of Maxim Integrated MAX1761EEE+T DC to DC converter applications.
- Balance equipment
- Automatic testing equipment
- SMT equipment
- Ball screw pair
- Automatic plug-in machines
- Network technology
- Surge protection circuits
- Arc suppression circuits
- Printing
- Television equipment
