MAX1762EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX17621 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 5V~20V |
| Control Features | Enable |
| Input Voltage (Min) | 5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 328kHz |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1762EUB+T Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. dc controls with 5V~20V voltage are supplied and operated. Suitable for work in a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 10 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. Searching "MAX17621" will return other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 5V. Statistically, DC regulator outputs 5.5V volts. Voltages 20V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulators have a maximum frequency of 328kHz.
MAX1762EUB+T Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
MAX1762EUB+T Applications
There are a lot of Maxim Integrated MAX1762EUB+T DC to DC converter applications.
- Radio equipment
- Bending machines
- Automatic plug-in machines
- Surface processing equipment
- Mobile phones
- Packaging
- Elevator lighting
- Flexible manufacturing cells
- Magnetohydrodynamic power
- Product burn-in
