MAX1771EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1771 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Control Features | Enable |
| Input Voltage (Min) | 3V |
| Topology | Boost, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 92% |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1771EPA+ Overview
Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. Tube solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 3V~16.5V. Worked in a -40°C~85°C TA dc switcher before. The switching controller can be switched at 300kHz. Through Hole makes it suitable for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE FREQUENCY MODULATION. Searching "MAX1771" will return other relevant dc to dc converter ics. In total, switching converter has 8 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 3V. DC regulator outputs 100V voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 2A.
MAX1771EPA+ Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE FREQUENCY MODULATION
MAX1771EPA+ Applications
There are a lot of Maxim Integrated MAX1771EPA+ DC to DC converter applications.
- Remotely powered electric motors
- Terrestrial set-top boxes
- Automatic testing equipment
- Surface processing equipment
- Automatic plug-in machines
- Digital display device
- Magnetohydrodynamic power
- Sink circuits
- Pipe bending machines
- Game consoles
