MAX1771EPA
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX1771 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 110μA |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Output Power | 24W |
| Control Features | Enable |
| Input Voltage (Min) | 3V |
| Topology | Boost, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE FREQUENCY MODULATION |
| Reference Voltage | 1.5V |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 92% |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1771EPA Overview
With a 8-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. 3V~16.5V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 300kHz. As it has a Through Hole value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE FREQUENCY MODULATION. In addition to "MAX1771", there are other relevant dc to dc converter ics you can find. There are a total of 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended to use 3V as the minimum input voltage of dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 12V. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 500kHz. The nominal current supply of this the controllers dc is 110μA.
MAX1771EPA Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE FREQUENCY MODULATION
MAX1771EPA Applications
There are a lot of Maxim Integrated MAX1771EPA DC to DC converter applications.
- Domestic water pumps
- Imported equipment
- Cutting machine tools
- Servo drive system
- Post equipment
- Industrial robots
- Printing
- Arc suppression circuits
- Terrestrial set-top boxes
- Boring machines
