MAX1771ESA+
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1771 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Max Output Current | 2A |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 110μA |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Output Power | 24W |
| Control Features | Enable |
| Max Output Voltage | 100V |
| Topology | Boost, Buck-Boost |
| Min Input Voltage | 3V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 16.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Reference Voltage | 1.5V |
| Synchronous Rectifier | No |
| Min Output Voltage | 2V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 92% |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
MAX1771ESA+ Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. A solid enclosure of Tube surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). 3V~16.5V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at DUAL . 8 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE FREQUENCY MODULATION. MAX1771 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 100V. normally, the dc dc regulator's output current is 2A, which you should keep in mind when starting a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 300kHz Hz. Because the dc switcher's maximum input voltage is 16.5V users must limit the voltage accordingly. There must be a 3V supply voltage. The dc switcher will not provide an output current greater than 2A. Depending on the datasheet, the switching converter can output 100V volts at its peak. Neither the voltage controller's lowest voltage output 2Vr its highest voltage output is less than 2V. Switching voltage regulators' nominal current supply is 110μA.
MAX1771ESA+ Features
Transistor Driver Outputs
Enable
PULSE FREQUENCY MODULATION
Frequency: 300kHz
MAX1771ESA+ Applications
There are a lot of Maxim Integrated MAX1771ESA+ DC to DC converter applications.
- Lathes
- Computed tomography (CT)
- Various precision measuring instruments
- Domestic water pumps
- Medical monitoring systems
- Sensitive electronic devices
- Special machining machine tools
- Photovoltaic power
- Electrical power transmission
- Solar power plants
