MAX1775EEE-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX1775 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Efficiency | 95 % |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 2.7V~28V |
| Control Features | Enable |
| Topology | Buck |
| Min Input Voltage | 2.7V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1.25MHz |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 1.25MHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1775EEE-T Overview
With its 16-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) can be handled by it. A 2.7V~28V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~85°C TA dc switcher before. There is a switch at Up to 1.25MHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable which allows efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Searching "MAX1775" will return other relevant dc to dc converter ics. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5.5V voltage based on test statistics. If you start a project, note down the dc dc regulator's usual output current of 2A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator's maximum frequency is 1.25MHz. When running the voltage regulator dc to dc in a circuit, users should apply 28V to ensure safety and reliability. The dc switcher's maximum input voltage is 28V; users must limit it accordingly. A voltage of 2.7V must be present in the supply.
MAX1775EEE-T Features
Transistor Driver Outputs
Switching Frequency: Up to 1.25MHz
Enable
PULSE WIDTH MODULATION
MAX1775EEE-T Applications
There are a lot of Maxim Integrated MAX1775EEE-T DC to DC converter applications.
- Plate bending machines
- Access control systems
- Large fire protection systems
- Post equipment
- Domestic water pumps
- Sink circuits
- Die casting equipment
- Gear/thread machining machines
- Computer rooms
- Cutting machine tools
