MAX1822ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1822 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 27.5V |
| Output Type | Fixed |
| Max Output Current | 500μA |
| Voltage - Input (Min) | 3.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 3.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Nominal Supply Current | 150μA |
| Output Configuration | Positive |
| Current - Output | 25mA |
| Voltage - Output (Min/Fixed) | Vin+11V |
| Topology | Charge Pump |
| Frequency - Switching | 90kHz |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1822ESA+ Overview
There is an optimized performance in this voltage regulator because it utilizes the Tube package. During the development of this harley voltage regulator, 8 terminations were made. As this regulator voltage is equipped with an analog IC of the type SWITCHED CAPACITOR REGULATOR, it is a SWITCHED CAPACITOR REGULATOR-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. 1 outputs of voltage regulator are configured. On its output pins, this adjusting voltage regulator generates Fixed output. Surface Mount-mount switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 90kHz. The voltage regulator can be operated with a voltage as low as 3.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to Vin+11V. As a result of the 25mA output current, voltage regulator offers maximum flexibility in design. A regulator with this 260 peak reflow temperature is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 5V for the purposes of operation. As a member of the MAX1822 family of DC/DC regulators, this is a DC/DC regulator. A voltage of 27.5V volts can be generated by DC DC switching regulator. To operate the voltage regulator 12v, 8 pins are required. Voltage regulator's maximal output current reaches 500μA A to meet the operation requirements. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 3.5V V is required. As long as the supply voltage is greater than 16.5V, the voltage regulator 12v will operate correctly.
MAX1822ESA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX1822ESA+ Applications
There are a lot of Maxim Integrated MAX1822ESA+ Voltage Regulators applications.
- Low output voltage switching power supply circuits
- Access control systems
- Wind power
- Window air conditioners
- Wide-range voltage regulation circuits
- Medical equipment
- Sensitive electronic devices
- Scientific research
- Drilling machines
- Fire elevators
